• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Allowing your cat to come and go from the house at their own pace is a good idea to keep it mentally and physically stimulated. A flap can help reduce toileting accidents by making it easier for your cat to exit the house whenever it wants to.

Measure the Door

A cat flap lets your pet come and go whenever they'd like without needing to open the door. This is a great method to keep your pet in the house when you are away or at home. It also helps keep unwanted pests out of your.

It is important to measure the door to ensure you get the correct size cat flap. There are a variety of sizes available. This will ensure that you purchase the right size to fit into your upvc door, otherwise, it could be too small or too large for your cat and he will have trouble using it.

Take a ruler, and measure the width at several places along the edges of the door. Also, determine the door's height in a few spots. This is because a door that is too high can cause your cat to perform a gymnast's routine every time they use the flap!

Ask a glazier for help if you aren't sure how to measure the door. They can determine whether your door is suitable for cat flaps and can advise you on what size flap to purchase.

When you've got your measurements, the next thing to do is mark the shape of the hole on the door. This will help you when cutting the hole and will save you money!

You should also make sure that the hole you're creating is in the correct place. If you are fitting A cat flap in a upvc door the cat flap in bifold doors flap onto the patio door, it is important that the hole doesn't be too close to hinges. This could cause leakage or issues with the seal.

If you have glass doors you could want to leave this task to a glazier. It isn't easy to install a cat-flap within an existing pane. You may also find that it cracks and loses its weatherproof seal.

Measure the Cat

A cat flap lets your pet move around as they wish without having to leave him home all by himself. It can also stop draughts entering your home, which is not good for your cat as well as you.

However, if you own a uPVC or composite door it could be a challenge to put in a cat flap. These doors are constructed of different materials, and the way they are installed is different. Make sure you check with the manufacturer if it is compatible prior to installing an uPVC cat flap on your uPVC composite or uPVC door. Modifications can cause warranty issues.

These doors are typically designed to be durable and tough and have insulation. They are more resistant to elements than other kinds of doors, however it isn't easy to install an animal flap. Consult a professional before installing a cat flap onto the uPVC door or composite.

To ensure that your cat is able to get through the door, you'll need determine their height. This will be easiest if they are asleep or calm, so that they don't move around too often. Once you have their height and weight, you can determine the distance between their stomachs and the floor to determine the position of the flap's bottom. You can then mark this spot on the door.

If your uPVC or composite door is made from metal (either steel or aluminium), you'll need to be very careful when cutting it using power tools. The act of drilling into metal could cause cracks, especially when the area is made of toughened glass. This is why it's advisable to hire a glazier when installing your cat flap inside a pane of glass. This will prevent the glass from becoming fragile or shattering. A Glazier is also capable of providing you with a circular cat flap hole that is less likely to break and is safer for your cat to use.

Cut the Hole

If not then you can create one yourself with a sheet of thin paper (tracing paper is ideal). If it doesn't, make your own using a thin sheet of paper (tracing papers are great). After the shape has been penciled in on the door, you can utilize your spirit level to make sure it's horizontal. This will allow your cat's flap to be properly seated in the opening and stop it from being in a position to slide open or close.

Next, take your jigsaw and cut the shape that has been marked on the door. Make sure that you're using a blade that is suitable for use on uPVC doors - usually it will be marked accordingly however, if not, ask the staff at your DIY store for assistance. Once the hole is cut then place the flap against it and open it to make sure the flap is moving smoothly. If it becomes stuck at any point, use a filer or a rasp to fix this.

Also, make sure whether there are no electrical gas or cable lines within the door you'll be cutting into because they could be damaged by the jigsaw. Similarly you should be aware of any handles or other fixtures on the door which will need to be removed in order to fit the cat flap. Be careful not to damage them during this process.

Most people who install the cat flap themselves have a standard solid uPVC door, and therefore won't have to deal with any of these issues. If your door is made from timber or has decorative panels that cannot be removed, this could make it more difficult to complete the job.

For these types of jobs, it is recommended to seek out expert advice from a cat-flap fitter. It is crucial to complete the job correctly to avoid any future issues. It is crucial to get it right as getting it wrong could damage the door and void the warranty.

Place the Flap

After you've cut your hole, put the flap to check whether it opens and is able to fit. If you spot any areas that catch or stick to the door, smooth them out using the aid of a hand file or sandpaper until it fits properly and opens without issue. Make sure that the flap is in a flush position with the door.

Some kits include an example of this, but even if yours doesn't provide a template, you could use a piece of thin paper instead, something like tracing paper ideally. Place the paper on the door and mark an area on which you'll need to position the flap (this will serve as your cutting guide). Draw four screw holes on every corner of the flap with the pencil marks you made on the door. These are the screw points that you'll need to use to fix it in place.

Most uPVC doors are sturdy and easy to cut. If your door is made of composite or GRP however, it could be more difficult. If you're not familiar window with cat flap this, it's recommended to consult an expert. They should also be able to provide you with advice on whether or not your specific door is suitable for cat flap installation.

You can install a cat flap into composite doors. However, it's essential to consult with the manufacturer or a professional joiner first as any alterations to these types of doors may invalidate the warranty. If you decide to complete the task yourself, remember that this could be messy and dangerous job.

For composite doors, you'll usually require the aid of a saw or grinder to cut through the door panel itself instead of just cutting through the GRP. Be aware that this could be extremely dangerous work and you'll have to take extreme care not to damage the door or yourself, as it's extremely fragile. It's also important to note that cutting fitting a cat flap hole in any kind of glass door is a lot more difficult than making the same change in the case of a uPVC or solid wood door.