• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Can an Infant Car Seat Be Placed in Front Seat?

When children are outgrowing their infant car seats, they can switch to convertible or all-in one car seats. These car seats are available in forward-facing and rear-facing models but they must satisfy certain weight and age requirements.

Car seats should not be placed in front of a vehicle seat equipped with airbags, as the force of the airbag could be fatal for infants and children.

1. The 1.5 Inch Rule

The answer to this question is no. The reason is very simple: If a crash happens and the child is involved, they could get their head hit by an airbag if they are in the front seat. The airbag can cause injury or even kill a baby.

Infant car seats are only designed to be rearward-facing. The backrest of the seat is positioned against the back of the vehicle seat in a crash, providing the best protection for your baby.

A rear facing infant car seat-facing car seat safeguards your child's head and neck better than a front-facing car seat that only offers minimal protection. The headrest stops your child from sliding off the shoulder straps in an accident. The harness holds the chest clip above the shoulders.

It's important to note that there are ZERO documented cases of kids in forward-facing car seats breaking their legs after hitting the rear of the front seat. This occurs when a child's feet fly upwards and get stuck against the back of the seat, which puts immense stress on the bones of the legs. There is no reason to put your child at risk for this.

There are a variety of programs in the United States for parents who qualify to receive discounted or free infant newborn car seat seats. This is a great chance to ensure your child is in a safe car seat before they grow out of it. It can be used for many years.

The base of most newer infant car seat models is designed to be easily removed and put back in, making them much easier to use. This feature is particularly beneficial when traveling with children because you can keep the car seat in place and ready for use even if you change vehicles.

Before you buckle your child in make sure that the back of the car seat will touch the car seat's back by finding the middle of the seat and measuring with a tape measure. A lot of things, like the blade of a house key, or the length of wireless earbuds, are about 1.5 inches long and can be used to determine this space. Examine the directions for the car seat as well as the owner's manual for your vehicle to determine whether the angle is adjusted to eliminate the space.

2. Harness Position

Preemies and newborns frequently are prone to fall into a risky chin-to-chest posture in Infant car seat in front seat car seats, bouncy seats strollers, swings and other toys for children. In the event of a crash, they could be injured by the chest clip or crushed by the straps of the harness that are loose or have not been placed over their shoulders. To avoid this, check that the straps on your shoulder start a bit lower and move upwards over the shoulders of the child and be sure to tighten them. The straps should be tight enough to allow you to pinch any excess fabric together This is known as the Pinch Test. Overly bulky outer layers such as winter coats can hinder this so be sure to remove them prior to buckling your child in their seat.

The chest clip is designed to break in a crash but it can cause a child's throat to collapse in the event that it's too high or if the chest straps aren't tight enough. It's also crucial that the chest clip not located in the neck opening of the collar - the buckle should be placed at the armpit level.

During a crash, rear-facing infants can slide across the seat and the harness straps must be able to hold the neck and head of the child. It is essential to put the straps on the shoulders. If the straps are too low they can slip over the baby's ears, or go through the neck opening and if they are too loose, they can slide toward the child's nose.

Make sure that the straps for your child's shoulders are properly fitted and positioned in the slots above or around the shoulders of your child. Newborns may require an infant insert (often provided with the car seat) to raise their shoulders until they can reach the slot. Some infant car seats come with angle indicators or adjustors that can assist you in this. You may also want to check the instructions included with the seat.

3. Rear-Facing Only

Parents may be enticed by the fact that their child's legs are getting shorter in the rear-facing seat, however there is no reason to do this. Rear-facing is more secure than forward-facing as the infant's spine and neck are protected in the event of an accident. Forward-facing children are more susceptible to serious injuries as their bodies are thrown against the vehicle.

Additionally, many infant car seats have an integrated angle indicator so you can ensure that the seat is installed correctly. Also, you must make sure your child's head is level against the seat and the harness straps are positioned over their shoulders, not under their arms or twisted. To determine if the harness is too tight it is best to squeeze a small amount of material at the shoulder of your child. It is also essential to examine the strap around the crotch to make sure it is level with the armpits, not at the waist. You should also review the instruction manual for your infant car seat so you are aware of how to use it correctly.

Most manufacturers recommend that kids remain rear-facing until they're at minimum one year old or until they reach the weight and height limits. Certain states have laws that require infants to be rear-facing for a minimum of two years.

If you have a vehicle that has only one rear seat, place the infant car seat in the middle so that you are able to easily see your child's face through the rearview mirror without needing to lean over. Installing the car seat on the driver's side can make it easier to get your child into and out of the seat.

If your vehicle has two back seats the infant car seat can be placed on either side so long as it's not in the airbag's front on the passenger's side. If you need to choose between installing the infant car seat on the left or right side of the vehicle, place it on the driver's side.

4. Booster Seats

Children who outgrow their infant car seat rear facing car seat by weight and height must be fitted with a booster seat until the vehicle seat belt fits them properly. This can only be done when the child is at least 4'9" tall and has reached the top of the headrest.

Booster seats assist in positioning the shoulder belt and lap correctly. Booster seats can also reduce the amount that a neck moves in a collision, reducing the risk of injury. Head movement is the main cause of motor vehicle crashes which are the most frequent fatality for children between the ages of 4 and 8.

If a booster is not used correctly the lap belt can slide across a child's abdomen and cause serious injuries if an accident occurs. This can be avoided with a belt guide on the booster to stop the lap belt from sliding up onto a child's stomach or climbing over armrests.

Many boosters come with small handles and armrests or guide slots to place the lap belt low and flat on a child's top legs. This will ensure that the lapbelt starts and stays on the strong hipbones of the child instead of slipping upwards into their abdominal area in the event of the event of a crash.

Certain booster seats feature a seatbelt locking mechanism that secures the seatbelt when a child is sitting in them. This will help to prevent the lapbelt from moving up and over the child's abdomen. This may also help stop the belt from being pulled over the face of a child, which could result in hypoxia and airway obstruction as and neck strain.