Machine Vision Total Solution
Download PDF
LED RING LIGHT
Product Features
  • The LED Ring Type lighting production and development in our own technology.
  • By arranging the high-brightness LED RIng to form 360 can be minimized even in the dark emits light in all directions.
  • By applying our own production technology enables two trillion people Walking Distance F.O.V and change according to your needs.
  • It can be applied to a variety of the most representative Application Type of LED lighting systems.
Typical Application Tool
  • When used for electronic circuit board Chip component location and character print state
  • When using LCD Glass Alignment measurement
FLAT RING LIGHT
Product Features
  • Developing our own technology to produce Type LED Flat Ring is one trillion people
  • To a horizontally arranged LED to the object, unlike the existing light was passed through a Diffuser can make the difference and halo effect for evenly irradiating light to the whole object.
  • Low-Angle Type can be applied to lighting and Ring Type Application that uses the light.
Typical Application Tool
  • When used for electronic circuit board Chip component location and character print state
  • Using optical measurement of a semiconductor wafer
  • Pitch meter intervals using a Connector
  • Used for measuring foreign matter on the upper surface and the inner surface of the test object
FLAT RING LIGHT
Product Features
  • Developing our own technology to produce LED Low-Angle Type Lighting
  • 360 of the test object, the light can also be irradiated at a low angle to be measured over the entire surface of the product Scratch and bending.
  • This sparkling LED array on the surface during the measurement object are reflected in the reduced use Diffuser problems that appear on the screen.
Typical Application Tool
  • When using BGA Solder Ball position and shape measurement
  • Glass used in the wafer surface or foreign matter and Scratch test
  • Edge inspection body used for measurement
LED COAXIAL EPISCOPIC LIGHT
Product Features
  • Developing our own technology to produce a Type LED Coaxial Episcopic one trillion people
  • Without lens, you can investigate the coaxial appointed to examine the surface of the object.
  • The ideal illumination is reflected on the surface of the object is very severe test.
Typical Application Tool
  • When using test patterns are printed onto an electronic circuit
  • Reflective wafer extremely heavy, metal surface, film, used in the unilateral Glass and Surface Alignment
  • Whether used for cooling the lighting Fan Sizing
LED BAR / UTILITY LIGHT
Product Features
  • LED Bar Type in lighting production and development in our own technology arranged two columns / three columns for Blue Type LED.
  • Bar Type a combination of lighting it can be used as Utility Type.
  • You can adjust the lighting angle and illumination angle of the test object.
  • Lighting can be applied to an object consisting of a curved measurement Application.
Typical Application Tool
  • Vaus metal used in the test board
  • SOP used in the test
  • Used for exterior measurements of ceramic materials
  • Mount part can be changed according to a user request
LED LINEAR LIGHT
Product Features
  • The LED Line Type lighting production and development in our own technology.
  • In combination with the Power LED lens lighting can produce a certain width.
  • By using the Power LED illumination intensity, unlike Line Type Bulb Type LED lights use the existing, increased approximately two-fold.
  • It can be applied to Application requiring a higher intensity light as Line Type and Line CCD CAmera.
Typical Application Tool
  • Metal and glass surfaces used for foreign body and Scratch test
  • Equipment used in a variety of mix and Line CCD Camera
LED BACK LIGHT
Product Features
  • The LED Backlight Type lighting production and development in our own technology.
  • Chip LED array as the light thickness was significantly line.
  • The strong illumination of the LED light is irradiated to the surface of the object clearly it shows the outer contour.
Typical Application Tool
  • Components used in the appearance and dimensional inspection
  • Hole location and used for dimensional inspection
  • Using LCD Pattern Checker
SPECIAL LED LIGHTING SYSTEM
Product Features
  • A high-resolution CCD, high-performance optics, LED lighting and a high uniformity of production based on the combined technologies Vision Module, LED lighting systems is also heightened.
  • The possible composite parts and defect detection in semiconductor substrate with high-speed response channel LED lighting.
  • LCD and semiconductor front-end process applied to the packaging line for fast fault detection to establish a stable production system (high reliability, high productivity).
  • The object to be inspected for a variety of Case by Case custom design, can be manufactured.
LED POWER SOURCE
Product Features
  • Control: UP & DOWN Switch operation is controlled by way of Contro rated the User wants to use
  • DIsplay: Lamp output value is expressed as a number on the front display window ILLUMINATOR
  • Store: It can save the user Lamp output value is used when power is off Lamp This output value is preserved.
  • Values: MCU (8bit) are available in 0-225 steps to fine-tune the operation to get the correct data than a regular VR.
  • Communication: RS232, can be made more useful by Control RS485 communication controlled by the PC.
  • Weight: compact and lightweight
HALOGEN TYPE ILLUMINATOR
Product Features
  • Control: UP & DOWN Switch operation is controlled by way of Contro rated the User wants to use
  • DIsplay: Lamp output value is expressed as a number on the front display window ILLUMINATOR
  • Store: It can save the user Lamp output value is used when power is off Lamp This output value is preserved.
  • Values: MCU (8bit) are available in 0-225 steps to fine-tune the operation to get the correct data than a regular VR.
  • Communication: RS232, can be made more useful by Control RS485 communication controlled by the PC.
  • Weight: compact and lightweight
  • Function: Lamp Off Detection
  • Color appearance are subject to change
STRAIGHT FIBER GUIDE
Product Features
  • It can be bent at various angles
  • Ground and polished to the end of the Glass Fiber Guide
  • Making available up to 12,000mm
  • General Flexible Silicone Flexible manufacturing allows others
STRAIGHT MULTIACCESS TYPE FIBER GUIDE
Product Features
  • Connect multiple Fiber Guide to fit one trillion people several directions simultaneously with a single light source.
  • Suitable for objects that require inspection checks from various angles, such as checking or flat-pin package.
  • Available from one of the light source up to 10 branch
  • Making available up to 10,000mm
LINE RING TYPE FIBER GUIDE
TELECENTRIC LENS
Product Features
  • Large Telecentric Lens
  • High Resolution Lens
  • 4M-grade CCD Sensor for possible [Active Image Size respond to 16.67mm × 16.05mm] (MFML-163)
  • Suitable for PCB mounting parts inspection board
ALIGN MARK OPTICAL SYSTEM
Product Features
  • High Resolution
  • Lens Align Mark inner insert (LED used)
  • LCD Align Align shorten the time from when the insertion point inside the Lens
  • It is a product developed to apply to suppliers and specialized test equipment.
  • It provides an optimized Optical Solution required for inspection equipment.